military scale modelling diorama products
Diorama walls 1:35
All PLASTER walls can also be casted in RESIN.
In that case 20% will be added to the original price.
​
NEW! DD197 Normandy stone wall 1:35 scale - RESIN
Typical Normandy stone wall, that can be used as an ambush cover. Detailed on both sides.
Material: Resin
Parts: 2 with additional rubble
Sizes (approx.): length: 19,5cm - height: 7cm - thick: 1,5cm
Unpainted and unassembled
€15,95
NEW! DD195 Workshop entrance
1:35 scale - RESIN
An industrial wall piece with a highly detailled front and flat back.
Material: Plaster
Parts: 1
Sizes (approx.): height: 9cm - width: 16cm
Unpainted
€10,95
NEW! DD196 Aged wall
1:35 scale - RESIN
A worn wall piece with a highly detailled front and flat back.
Material: Plaster
Parts: 1
Sizes (approx.): height: 9cm - width: 16cm
Unpainted
€10,95
NEW! DD193 Fenced wall 'Diekirch'- 1:35 scale - RESIN + plastic
A fancy fence that can be positioned straight or as a corner. It contains 2 sections that can be placed apart to create an entrance.
Material: Resin
Parts: 10 Resin + 2 plastic
Sizes (approx.): height: 5,8cm - width: 10cm (2 x) - depth: 1,7cm
Unpainted and unassembled
€13,95
DioDump DD109 Village wall fountain - 1:35 scale - RESIN
This authentic old wall with fountain will make a great eye catcher in your (ww2 military) diorama or vignette. The design is suitable for multiple European theaters. Very sharp casted in resin The main wall has a highly detailed front and a flat back.
Kit contains of 3 resin parts, 2 small iron rods and a piece of transparent wire. Sizes (approx.): length 19,8cm x height 8,8cm x depth: 3cm.
€ 19,95
DioDump DD015 Monastery gate 'Saint-Lo' - 1:35 - RESIN
This original old wall with gate will make a great eye catcher in your (ww2 military) diorama or vignette. The authentic design is basically suitable for any European theatre. Very sharp casted in resin. The main wall has a highly detailed front and a flat back. There is also a small side wall, detailed on both sides, that can be positioned in multiple ways to match your diorama lay-out. The gate/door is double sided resin and can be cut through the middle to create an open door. Finally it features a small resin wall shrine. Instructions included. Sizes main wall: length 21,4cm x height 10,7cm.
€19,95
DioDump DD074 Broken wall section 'Cinzano'- 1:35 scale - RESIN
This Italian or French stone wall can be ued as a back drop for a figure vignette or as a part of a larger diorama.
2 Plaster parts, 1 resin part and a large decal. Sizes approx.: height: 8cm, width: 13cm, depth: 4cm. Flat undetailled back that can be engraved (plaster) if desired. Unassembled and unpainted.
€10,95
DioDump DD172 Old doorway - 1:35 scale - RESIN
This old doorway section is versatile in use. It can be ued as a back drop for a figure vignette or as a part of a larger diorama.
2 Resin parts & 2 Lasercut cardboard parts. Sizes approx.: height: 140mm, width: 70mm. Flat back. Unassembled and unpainted.
€8,95
DioDump DD132 Farm gate - 1:35 scale - RESIN
Highly detailed wooden gate with 2 brick pillars. Great for 1:35 scale diorama building. 3D Detail.The gate can be easily be 'opened' by cutting it in half and removing the side supports. Dimensions (approx.): Width: 140mm - Height: 82mm
Unassembled and unpainted item.
€9,95
DioDump DD133 Farm wall - 1:35 scale - RESIN
2 Highly detailed brick walls with 3 pillars. Great for 1:35 scale diorama building. 3D Detail. Dimensions (approx.): Width: 263mm - Height: 73mm. Unassembled and unpainted item.
€15,95
DioDump DD134 Farm wall + gate - 1:35 scale - RESIN
Highly detailed wooden gate with walls and pillars. Great for 1:35 scale diorama building. 3D Detail.The gate can be easily be 'opened' by cutting it in half and removing the side supports.Dimensions (approx.): Width: 387mm - Height: 82mm
Unassembled and unpainted item.
€22,95
DioDump DD107 Concrete panel fence 1:35 scale - RESIN
Single piece, highly detailed concrete panel fence. Material: resin (unpainted) Size: approx. 20cm x 5,7cm.
Easy to cut and re-position if you prefer a corner shaped fence
€8,95
DioDump DD064 Fenced wall 'Aachen' - 1:35 scale - RESIN + plastic
This wall section is versatile in use. Not only can it be moduled in various shapes and lengths but it's general building style makes it suitable for all theatres. The 8 resin parts are highly detailed. Also note the 2 excelent ornamented fences from ABS (hard plastic). Sizes approx.: length: 180mm, height: 64mm. Unassembled and unpainted.
€ 12,95
DioDump DD024 Factory gate - 1:35 scale - RESIN
This stunning vintage factory gate will be an eye catching backdrop for your urban or Industrial diorama. Brought to you by DioDump in cooperation with Reality In Scale.
Features: - Option between open or closed gates - Authentic industrial sign - Realistic brick walls - Detailed on both sides
- Modulable: walls can be placed either alligned to gate or at 90 degrees to the gate to fit your diorama lay-out. - 7 Sharply casted pieces in high quality resin
Sizes approximately: width 350mm, height 120mm.
The kit is unassembled and unpainted.
€ 24,95
DioDump DD027 Cinder block wall corner 'Fallujah' - 1:35 scale - RESIN + plastic
This 'modern' cinder block wall corner is perfect for any (military) diorama or vignette with a Middle Eastern theme.
The kit consists of 3 highly detailed resin parts, 3 ABS fences, iron wire and a small set of Iraqi election posters.
Due to the modular system you can position your wall in multiple ways to suit your diorama lay-out.
€ 15,95
DioDump DD062 Brick wall ´Nijmegen´ - 1:35 scale - RESIN
Walls have always been popular diorama items. They are relatively small and are versatile in use. This brick wall with its typical sloped masonry can mainly be found in the Low Countries, but would do fine as well in other Western European scenes. This kit consists of 3 highly detailed resin parts and includes a small sheet with Dutch WW2 propaganda posters. Unassembled and unpainted. This wall has been newly tooled with a better mould: the previous edition had a flat back. This new edition is detailed on both sides!
€ 15,95
DioDump DD063 Broken brick wall ´Arnhem´ - 1:35 scale - RESIN
The same wall as DD062, only with a large gap in it. This kit consists of 4 highly detailed resin parts and a small bag of additional debris. Unassembled and unpainted. This wall has been newly tooled with a better mould: the previous edition had a flat back. This new edition is detailed on both sides!
€ 15,95
DioDump DDOO3 Broken wall section ´Bayeux´ - 1:35 scale - RESIN
€ 7,95
DioDump DDOO4 Broken wall section ´Anzio´ - 1:35 scale - RESIN
€ 7,95
DioDump DDOO5 Broken wall section ´Tobruk´ - 1:35 scale - RESIN
€ 8,95
